Frayed at the ends? That’s cool

Consider it “altered threads” — that is, intentionally fraying the end of a thread to create a unique texture. This works for making tassels, creating a fuzzy effect, replicating hair (yes, metallic hair), and other texture choices. Step one is to take your finger and tap the end of the thread to separate the strands. Alternately, you can use a straight pin or needle to gently pull apart the fibers.

If you are involved in card making, scrapbooking, collage, and other fiber art on paper, Kreinik iron-on-threads are the quickest way to add metallic thread embellishments. No stitching required. Here is how we made tassels by fraying the edges of the fusible ribbon fibers:

Fusible Tassel

  1. You will need: Kreinik Iron-on Ribbon, Kreinik Press Cloth, Home Iron or Craft iron turned on to the highest heat setting, straight pin or needle
  2. Cut a length of Kreinik Iron-on Ribbon. Lay thread onto scrap of cardboard.  Using a straight pin, gently comb through the ribbon to separate the fibres, creating a frayed effect.  Continue using a straight pin or an old toothbrush until both ends have been frayed approximately 1 1/4” (or desired length). Do not fray the entire piece of ribbon, just the edges.
  3. Lay the ribbon onto your cardstock or page. Fan threads out with a pin until desired effect is achieved.  Press with your hot iron, using the press cloth (either Kreink’s Adhesive Press Cloth or Non-Adhesive Press Cloth) to protect your iron plate.
  

Post a Comment

Search This Blog

About This Blog

News direct from thread maker Kreinik Mfg. Co., Inc., located in Parkersburg, West Virginia. Visit our factory outlet store when you are in the area; call for hours 1-800-537-2166.

  © Template by Ourblogtemplates.com

Back to TOP